SC1000 Probe Module, 4 sensors, 4 mA OUT, 4 mA digital IN, 4 relays, Modbus (RS485), 100-240 VAC, with US power cord

SC1000 Probe Module, 4 sensors, 4 mA OUT, 4 mA digital IN, 4 relays, Modbus (RS485), 100-240 VAC, with US power cord
# de producto: LXV400.99.5B522
Precio final Contacto Hach

Plug-and-Play Operation

there's no complicated wiring or set up procedures with the SC1000 controller. Just plug the sensor into a Probe Module and it is ready for use without special ordering or software configuration.

Mix and Match Digital Sensors

Any of Hach's digital sensors and analyzers can be plugged into the Probe Module. Choose from Hach's line of digital sensors: dissolved oxygen, pH, ORP, conductivity, turbidity, suspended solids, nitrate, etc. and analyzers: ammonium, phosphate, etc. Use them in any combination.*

Flexible Input/Output Options

Communication and relay options for the SC1000 controller can be configured to suit any situation. Available configurations for a single Probe Module include: • up to 4 relay contacts for alarm and control functions, • up to 12 analog outputs for measured values, • up to 12 analog or digital inputs from non-digital sensors (i.e., flow or pressure sensors), • up to 8 digital inputs from digital sensors, • select from multiple network card options such as MODBUS®, PROFIBUS DP, and more."

Ampliable y actualizable

The SC1000 controller can adapt to your needs. Change probes without changing the controller. Probe Modules can be added or removed depending on operational needs. Fully upgradable software ensures that this system will not become obsolete for the foreseeable future.

Advanced Communication Options

Use the SC1000 controller for hassle-free communications. Advanced communication features include: Modbus TCP/IP. The SC1000 controller features state-of-the art Modbus TCP/IP communications protocol for seamless integration into a network of devices that support TCP/IP sockets. Use a standard Ethernet cable or connect wirelessly using GSM/GPRS to communicate with your SCADA, PLC or your organization's network.

Contenido de la caja

SC1000 Probe Module with installed cards (as requested), Basic User Manual

Especificaciones

Alarma: Punto de alarma bajo, banda muerta de punto de alarma bajo, punto de alarma alto, banda muerta de punto de alarma alto, retardo de desactivación y retardo de activación
Analog Output: One 4-20 mA Output Module, maximum impedance 500 Ohms per probe module. Optional digital communcations via Modbus (RS485)
Capacidades de comunicación: Modbus 485
Certificaciones: Certificados europeos:
CE conforme a 73/23/CEE y a 89/336/CEE
TUV-GS para EN 61010-1
Enmiendas 1 y 2 de EN 61326
Comunicación: Modbus (RS485): comunicaciones/redes avanzadas con sistema PLC o SCADA directamente del analizador
Profibus DP/V1 (certificado)
Módem GSM/GPRS de cuatro bandas (aprobado por la FCC e IC, solo en la UE y EE. UU.)
Puerto de servicio Ethernet, RJ45, 10 MB/s
Condiciones de almacenamiento: -20 - 70 °C (de -4 a 158 °F), humedad relativa máx. del 0 al 95 %, sin condensación
Conduit for Relay Connection: No
Contenido de la caja: SC1000 Probe Module with installed cards (as requested), Basic User Manual
Dimensiones (A x A x P): 150 mm x 315 mm x 250 mm
Entradas: Hasta 12 entradas analógicas de 0-20 mA, impedancia máxima de 500 ohmios por módulo de sonda. Hay más entradas disponibles con módulos de sonda adicionales.
Entradas analógicas: One 4-20 mA/digital Input Module, impedance 500 Ohms per probe module.
Garantía: 12 meses
Material del encerramiento: Carcasa ABS (módulo de pantalla) y metálica (módulo de sonda) con acabado resistente a la corrosión
Opciones de energía: 100-240V AC, US Power Cord
Pantalla: 11,4 x 8,6 cm
  Pantalla gráfica TFT VGA de vidrio/vidrio táctil con retroiluminación a color de 1/4 pulg. de alta resistencia y con 320 x 240 píxeles
Peso: Approximately 6.5 kg (depending on configuration)
Prognosys: No
Protección de la carcasa (IP): IP65
Rango de Temperatura de operación: -20 - 55 °C / 0 - 95% relative humidity, non-condensing
Relés: 4 Relays
RTC Module: No
Salida: Up to 12 analog 0/4-20 mA, maximum impedance 500 Ohms per probe module.

Additional analog outputs with additional probe modules. Optional digital communcations via Modbus® (RS485) and Profibus® DP/V1.
  Up to 12 analog 0/4-20 mA, maximum impedance 500 Ohms per probe module.

Additional analog outputs with additional probe modules. Optional digital communcations via Modbus® (RS485) and Profibus® DP/V1.
Salida analógica: modo de funcionamiento: PID, high/low phasing, setpoint, deadband, overfeed timer, off delay, on delay
Sensores: 4
Tipo de montaje: Superficie, panel y pértiga (horizontal y vertical) con protector solar opcional